Materials Science

Nanoplatelet reinforcement of cavity cell walls in polymer foams using carbon dioxide supercritical fluid
H. W. Seo, Y. J. Kim, S. Kim, J. Park, K. Choi, I.-K. Park, T. Kim, J. Suhr, K. J. Kim, and J.-D. Nam. Journal of Applied Polymer Science 135 (33), 46615 (2018) [PDF] [DOI]

Understanding the Thermal Properties of Precursor-Ionomers to Optimize Fabrication Processes for Ionic Polymer-Metal Composites (IPMCs)
S. Trabia, K. Choi, Z. Olsen, T. Hwang, J.-D. Nam, and K. J. Kim. Materials 11(5), 665 (2018) [PDF] [DOI] [PubMed]

Nonlinear and Complex Cure Kinetics of Ultra-thin Glass Fiber Epoxyprepreg with Highly-loaded Silica Bead under Isothermal and Dynamic-Heating Conditions
Y. C. Kim, H. Min, J. Yu, J. Suhr, Y. K. Lee, K. J. Kim, S. H. Kim, and J.D. Nam. Thermochimica Acta 644,28-32 (2016) [PDF] [DOI]

Electromechanical Performance and Other Characteristics of IPMCs Fabricated with Various Commercially Available ion exchange membranes
 J. Park, V. Palmre, T. Hwang, K. J. Kim, W. Yim, and C. Bae. Smart Materials and Structures 23(7), 074001 (2014) [PDF] [DOI]

High-Performance Heat Sink Composites Incorporating Micron-sized Inorganic Fillers and Sn/In Metal Particles
J.-P Hong, S.-W. Yoon, T. S. Hwang, J. S. Oh, S.-H. Hong, Y. Lee, J.-D. Nam, Md M. Bhuiya, and K. J. Kim. Polymer Engineering & Science 52(11), 2435-2442 (2012) [DOI]

Thermal Conductivity Measurements of Copper-Coated Metal Hydrides (LANI5, CA0.6Mm0.4NI5, and LANI4.75AL0.25) for Use in Metal Hydride Hydrogen Compression Systems
M. Lee, K. J. Kim, R. R. Hopkins, and K. Gawlik. International Journal of Hydrogen Energy 34, 3185-3190 (2009) [DOI]

Experimental Investigation on Electrochemical Properties of Ionic Polymer-Metal Composite
D. Kim and K. J. Kim. Journal of Intelligent Materials Systems and Structures 17(5), 449-454 (2006) [DOI]

Long Term Testing for Dropwise Condensation Using Self-Assembled Monolayer Coatings of n-Octadecyl Mercaptan
S. Vemuri, K. J. Kim, B. D. Wood, S. Govindaraju, and T. W. Bell. Applied Thermal Engineering 26(4), 421-429 (2006) [DOI]

Effect of Multiwalled Carbon Nanotube (M-CNT) Loading on M-CNT Distribution Behavior and the Related Electromechancial Properties of the M-CNT Dispersed Ionomeric Nanocomposites
D. Y. Lee, M.-H. Lee, K. J. Kim, S. Heo, B.-Y. Kim, S.-J. Lee. Surface Coatings and Technology 200(5-6), 1916-192 (2005) [DOI]

Novel Physically-Loaded and Interlocked Electrode Developed for Ionic Polymer-Metal Composites (IPMCs)
M. Shahinpoor and K. J. Kim. Sensors and Actuator: A. Physical 96(2/3), 125-132 (2002) [DOI]

A Study on Elongation/Contraction Behavior and Mechanical Properties on Oxy-Polyacrylonitrile (PAN) Fiber in Basic/Acidic Solution
S. W. Kim, K. S. Lee, I. H. Cho, J. H. Lee, J. W. Lee, Y. K. Lee, K. J. Kim and J. D. Nam. Polymer Korea 26(4), 468-476 (2002) [DOI]

Morphological Behavior of oxy-PAN Fiber Upon pH Variation
J. C. Kim, H. J. Kim, D. G. Yoo, C. J. Jung, J.-D. Kim, Y. K. Kim, and K. J. Kim. Polymer Korea 26(4), 492-500 (2002) [DOI]

Ionic Polymer-Metal Composites – I. Fundamentals
M. Shahinpoor and K. J. Kim. Smart Materials and Structures 10(4), 819-833 (2001) [DOI]

Development of LaNi5/Cu/Sn Metal Hydride Powder Composites
K. J. Kim, G. Lloyd, A. Razani, and K. T. Feldman, Jr. Powder Technology 99, 40-45 (1998) [DOI]